Resume of Dr.Akihiro Takita

<Present appointment>
Assistant professor
Division of Mechanical Science and Technology
Faculty of Science and Technology
Gunma University
1-5-1, Tenjin-cho, Kiryu city, Gunma 376-8515, Japan

<Academic qualifications>
March 2001, B.E. (Bachelor of Engineering) conferred by The University of Tokushima.
March 2003, M.E. (Master of Engineering) conferred by The University of Tokushima.
March 2006, Dr. Eng (Doctor of Engineering) conferred by The University of Tokushima.

<Work Experience>
2006-2009: Department for the Promotion of Industry-Academia-Government Collaboration, The University of Tokushima
2009-2011: Utsunomiya University Center for Optical Research & Education (CORE)
2011-: Gunma University

Member, The Japan Society of Applied Physics (JSAP)
Member, Optical Society of Japan (OSJ)
Member, The Laser Society of Japan
Member, The Optical Society of America (OSA)

<Major Research Field>
*Femtosecond laser processing, Femtosecond laser-induced phenomena, Interferometry.

<Publications in Journals>

(1) A. Takita, M. Watanabe, H. Yamamoto, S. Matsuo, H. Misawa, Y. Hayasaki and N. Nishida: Optical bit recording in a human fingernail, Jpn. J. Appl. Phys., vol. 43, no. 1, pp. 168-171, (Jan. 2004).
(2) Y. Hayasaki, H. Takagi, A. Takita, H. Yamamoto, N. Nishida and H. Misawa: Processing structures on human fingernail surface by a focused near-infrared femtosecond laser pulse, Jpn. J. Appl. Phys., vol. 43, no. 12, pp. 8089-8093, (2004).
(3) A. Takita, H. Yamamoto, Y. Hayasaki, N. Nishida and H. Misawa: Three-dimensional optical memory using a human fingernail, Opt. Exp., vol. 13, no. 12, pp. 4560-4567, (2005).
(4) Y. Hayasaki, T. Sugimoto, A. Takita and N. Nishida: Variable holographic femtosecond laser processing by use of spatial light modulator, Appl. Phys. Lett., vol. 87, no. 3, pp. 31101-1-3, (2005).
(5) D. Kawamura, A. Takita, Y. Hayasaki and N. Nishida, "Method for reducing debris and thermal destruction in femtosecond laser processing by applying transparent coating", Appl. Phys. A, vol. 82, no. 3, pp. 523-527, 2005.
(6) D. Kawamura, A. Takita, Y. Hayasaki and N. Nishida, "Bump formation on glass surface with a transparent coating using femtosecond laser processing", Appl. Phys. A, vol. 85, no. 1, pp. 39-43, 2006.
(7) A. Takita, Y. Hayasaki and N. Nishida, "Femtosecond laser processing system with target tracking feature", J. Laser Micro/Nanoeng., vol. 1, no. 3, pp. 288-291, 2006
(8) K. Fujita, A. Takita, K. Nagao, T. Ichikawa and Y. Hayasaki, "Data recording on dental prostheses for personal identification", Jpn. J. Appl. Phys., vol. 47, no. 9, pp. 7190-7194, 2008.
(9) H. Takahashi, S. Hasegawa, A. Takita and Y. Hayasaki, "Sparse-exposure technique in holographic two-photon polymerization", Opt. Exp., vol. 16, no. 21, pp. 16592-16599, 2008.
(10) A. Takita and Y. Hayasaki, "Interference measurement of a superposition of laser-induced shock waves in water", Jpn. J. Appl. Phys., vol. 48, pp. 09LD04-1-4, 2009.
(11) H. Ebara, A. Takita, T. Azami, Y. Fujii, "Development of Material Tester using Pendulum", Key Engineering Materials, Vol. 459, pp. 183-189, (Dec. 2010).
(12) Y. Fujii, A. Takita, J. Kaewkhao, M. Djamal and T. Yamaguchi, "Precision Force Measurement Using the Levitation Mass Method (LMM)", Appl. Mecha. Mat., Vol. 103, pp. 1-8, (Sep. 2011).
(13) Y. Hayasaki, K. Iwata, S. Hasegawa, A. Takita and S. Juodkazis, "Time-resolved axial-view of the dielectric breakdown under tight focusing in glass", Optical Materials Express Vol. 1, pp. 1399-1408, (Dec. 2011).
(14) J. Ozawa, A. Takita, T. Azami, and Y. Fujii, "Microforce Material Tester Using Small Pendulum II", Key Engineering Materials, 497, pp.169-175, (Dec. 2011).
(15) A. Takita, H. Ebara, Y. Fujii, "Dual beat-frequencies laser Doppler interferometer", Rev. Sci. Instrum., Vol.82, 123111, (Dec. 2011).
(16) T. Jin, A. Takita, M. Djamal, W. Hou, H. Jia and Y. Fujii, "A method for evaluating the electro-mechanical characteristics of piezo-electric actuators during motion", Sensors, Vol. 12, pp.11559-11570, (Aug. 2012).
(17) T. Yamaguchi, Y. Fujii, A. Takita and T. Kanai, "FEA for transient responses of an S-shaped force transducer with a viscoelastic absorber using a nonlinear complex spring", World Academy of Science, Engineering and Technology, Vol. 6, No. 11, pp. 586-593, (Nov. 2012).
(18) Y. Hayasaki, M. Isaka, A. Takita, S. Hasegawa, S. Juodkazis, "Photo-acoustic sub-micrometer modifications of glass by pair of femtosecond laser pulses", Optical Material Express Vol. 2, pp. 691-699, (May 2012).
(19) Y. Hayasaki, M. Nishitani, H. Takahashi, H. Yamamoto, A. Takita, D. Suzuki and S. Hasegawa, "Experimental investigation of the closest parallel pulses in holographic femtosecond laser processing", Applied Physics A Vol. 107, No. 2, pp. 357-362, (May 2012).
(20) Y. Hayasaki, M. Isaka, A. Takita and S. Juodkazis, "Time-resolved interferometry of femtosecond-laser-induced processes under tight focusing and close-to-optical breakdown inside borosilicate glass", Optics Express Vol. 19, Issue 7, pp. 5725-5734 (Mar. 2011).
(21) Y. Fujii and A. Takita, "Correction method for force transducers on dynamic condition with or without the Levitation Mass Method (LMM)", Procedia Engineering, Vol. 32, pp. 13-17, (Mar. 2012).
(22) T. Jin, A. Takita, S. Mitatha, P. P. Yupapin, H. Z. Jia, W. M. Hou and Y. Fujii, "Method for acceleration measurement using a laser Doppler interferometer", Meas. Sci. Technol., Vol. 24, No.7, 077001, (May 2013).
(23) T. Jin, K. Watanabe, I. Aji, A. Takita, S. Mitatha, M. Djamal, H. Z. Jia, W. M. Hou and Y. Fujii, "High-speed impact test using an inertial mass and an optical interferometer", Rev. Sci. Instrum. Vol.84, 075116, (July 2013).
(24) R. Araki, K. Irisa, K. Watanabe, N. Miyashita, A. Takita and Y. Fujii, "The Dynamic Characteristics of Gelled Food Materials against Small Impact Force", J. Institute Indust. App. Eng., Vol. 2, No. 1, pp. 19-23, (Jan. 2014).
(25) T. Yamaguchi, Y. Fujii, T. Fukushima, N. Tomita, A. Takita, K. Nagai and S. Maruyama, "Damping response analysis for a structure connected with a nonlinear complex spring and application for a finger protected by absorbers under impact forces", Mech. Syst. Signal Proc., Vol.42, No.1-2, pp.88-96, (Jan 2014).
(26) M Djamal, K Watanabe, K Irisa, I A Prayogi, A Takita, T. Yamaguchi and Y Fujii, "Dynamic characteristics measurements of a force transducer against small and short-duration impact forces", Metrology and Measurement Systems, Vol. 21 , No. 1, pp. 59–66, (Feb. 2014).
(27) A. Takita, Y. Ono and Y. Fujii, "Review of Dynamic-Force Correction Method for a Force Transducer with the Levitation Mass Method", INFORMATION, Vol. 17, No. 2, pp.539-544, (Feb. 2014).
(28) J. S. Pastoril, K. Watanabe, K. Irisa, I. A. Prayogi, A. Takita, E. Carcasona and Y. Fujii, "Determination of Reaction Force in a Toothbrush Tuft using Levitation Mass Method (LMM)", J. Institute Indust. App. Eng., Vol. 2, No. 2, pp. 48-53, (Apr. 2014).
(29) K. Muramatsu, M. Ishizawa, A. Takita, N. Yoshiura, N. Ohta, K. Maru, H. Ueda and Y. Fujii, "Shopping street safety using all-in-one-type security cameras", ICIC Express Letters, Vol.8, No.11, pp. 3001-3006 (Nov. 2014).